MiniScan-25PS, -50PS, -100PS, and 200PS
MiniScan-25PS, -50PS, -100PS
are compact and easy use units for pulse width range 25ps, 50ps and 100ps, respectively. The basic models are good for 50fs pulse width and can be good for 10fs with short pulse options. The delay time resolution is 0.16fs for basic model and 0.087fs for short pulse option. The MiniScan-25PS to -100PS are available with two-photo sensor for wavelength tuning free or SHG crystal detection. They are suitable for laser repetition rate <10Hz to 1GHz (good for both laser amplifier and oscillator). It has the wavelength range 400-3400nm with the options. The very high sensitivity (10-6 W2 typically <1mW average power) and the high dynamical range (>108) is suitable for most lasers. The very compact size 151x100x78 (in mm) makes it portable and suitable to tight space application.
Specifications of MiniScan-25PS, -50PS, -100PS:
|
Pulse Width Range
|
Basic model: 50fs-25PS, 50fs-50ps, and 50fs-100ps
|
|
Short Pulse Option
|
(1)20fs option; (2) 10fs option
|
|
Standalone Unit
|
These are standalone unit can be monitored by an oscilloscope. Two BNC cable are required.
|
|
Wavelength Range
|
Basic model: 700-1200nm, 400-3400nm with options
|
|
Wavelength option
|
(1)1200-2100nm; (2) 400-680nm; (3)2000-3400nm. Easy to switch each other
|
|
Delay Time Resolution
|
0.16fs for basic model, 0.087 with shot pulse options
|
|
Delay linearity
|
<0.001%
|
|
Sensitivity(2)
|
10-6 W2, as low as <1mW average power
|
|
Laser Repetition
|
<10 Hz to 1GHz
|
|
Max. Input Power
|
200 mW or 5 μJ (whichever results in lower value)
|
|
Measurement Mode
|
Collinear intensity
|
|
Two-Photo Sensor
|
No Phase Matching tuning for different wavelength
|
|
Trigger Mode
|
Internal trigger, no need for external trigger
|
|
Input Polarization
|
Linear horizontal and vertical
|
|
Input Aperture
|
6 mm (free-space)
|
|
Input Beam Coupling
|
Free-space; Input Optional: fiber coupling FC/PC or other type
|
|
Dynamical Range
|
>108 adjustable
|
|
Power supply
|
100-220V 50-60Hz 24V DC output
|
|
Digit Scope option
|
USB Digit scope option needed for computer operation
|
|
software
|
Digit scope software Including Real-time display of pulse width, data average, auto fitting routines to Gaussian, Lorentz, Squared Sech shape
|
(1) The SHG crystal model is available with similar specifications correspondent to the Two-photo model.
(2)Measured sensitivity defined as average power times peak power of the incident pulses PAV * Ppeak
Options ▪ USB digit scope option for computer operation ▪ Wavelength option ▪ Short pulse option ▪ Fiber coupling Options
MiniScan-200PS
The MiniScan-200PS is for pulse width 50fs to 200ps for basic model. The unit needs a window 7 or up computer to operate. The pulse as short as 10fs is available with short pulse option. The delay time resolution is 0.16fs for basic model and 0.087fs for short pulse option. Both the two-photo sensor and SHG crystal detection models are available. They are suitable for laser repetition rate <10Hz to 1GHz (good for both laser amplifier and oscillator). It has the wavelength range 400-3400nm with the options. The very high sensitivity (10-6 W2 typically <1mW average power) and the high dynamical range (>108) is suitable for most lasers. The very compact size 196x120x102 (in mm) makes it suitable to tight space application.
MiniScan-200PS Specifications(1)
|
Pulse Width Range
|
Basic model: 50fs-200ps
|
|
Short Pulse Option
|
(1)20fs option; (2) 10fs option
|
|
Wavelength Range
|
Basic model: 700-1200nm, 400-3400nm with options
|
|
Wavelength option
|
(1)1250-2100nm; (2) 400-680nm; (3)2000-3400nm. Easy to switch each other
|
|
Delay Time Resolution
|
0.16fs for basic model, 0.087 with shot pulse options
|
|
Delay linearity
|
<0.001%
|
|
Sensitivity(2)
|
10-6 W2, as low as <1mW average power
|
|
Laser Repetition
|
<10 Hz to 1GHz
|
|
Max. Input Power
|
200 mW or 5 μJ (whichever results in lower value)
|
|
Measurement Mode
|
Collinear intensity
|
|
Two-Photo Sensor
|
No Phase Matching tuning for different wavelength
|
|
Trigger Mode
|
Internal trigger, no need for external trigger
|
|
Input Polarization
|
Linear horizontal and vertical
|
|
Input Aperture
|
6 mm (free-space)
|
|
Input Beam Coupling
|
Free-space; Input Optional: fiber coupling FC/PC or other type
|
|
Dynamical Range
|
>108 adjustable
|
|
Power supply
|
100-220V 50-60Hz 24V DC output
|
|
Digit Scope option
|
USB Digit scope option needed for computer operation
|
|
software
|
Digit scope software Including Real-time display of pulse width, data average, auto fitting routines to Gaussian, Lorentz, Squared Sech shape
|
(1) The SHG crystal model is available with similar specifications correspondent to the Two-photo model.
(2)Measured sensitivity defined as average power times peak power of the incident pulses PAV * Ppeak
Options ▪ USB digit scope option for computer operation ▪ Wavelength option ▪ Short pulse option ▪ Fiber coupling Options
Required equipment: A computer with window 7 or up is required.
Minioptic Technologies, Inc. is also the leader in TimePlate Tripler including second harmonic generation (SHG), third harmonic generation (THG) and fourth harmonic generation (FHG) for Ti:sapphire amplifier laser and Ti;sapphire oscillator.